Honda Accord 2008 Manual page 2731

07/11/02 09:42:59 61TA0000_240_0008
Seat Belts
Front Seat Belt Replacement (cont'd)
Front Seat Belt - 4-door
SRS components are located in this area. Review the
SRS component locations (see page 24-19) and the
precautions and procedures (see page 24-23) before
doing repairs or service.
NOTE: Check the front seat belts for damage (see page
24-17), and replace them if necessary.
1. Slide the front seat all the way forward. Carefully
pry up on the bottom of the anchor cover (A) to
release the hooks (B) and the tab (C), then remove
the cover by pulling it upward.
Driver's seat
＊０１
Passenger's seat
＊０２
A
24-8
B
C
B
C
2. Remove the lower anchor bolt (A).
A
7/16-20 UNF
32 N·m (3.3 kgf·m, 24 lbf·ft)
3. Do the battery terminal disconnection procedure
(see page 22-89), then wait at least 3 minutes
before beginning work.
A
4. Remove the B-pillar lower trim (see page 20-107).
5. Remove the B-pillar upper trim (see page 20-107).
6. Remove the upper anchor bolt (A).
ＴＡ０８ＡＢ４Ｈ４６２０００５３４０１ＫＢＡＴ０２
A
7/16-20 UNF
32 N·m
(3.3 kgf·m, 24 lbf·ft)
＊０３
＊０４