Honda Accord 2008 Manual page 2892

07/11/02 09:53:06 61TA0000_240_0169
DTC 81-71, 81-78:
Calibrate
DTC 85-71, 85-78:
NOTE: Before doing this troubleshooting procedure,
review SRS Precautions and Procedures (see page
24-23) and General Troubleshooting Information
(see page 24-35).
1. Clear the DTC memory (see page 24-36).
2. Turn the ignition switch to ON (II), then wait for 10
seconds.
3. Read the DTC (see page 24-36).
Is DT C 81-7 1, 81-7 8, 85-7 1, or 85-7 8 indicated?
YES − Go to step 4.
−
NO Intermittent failure, the system is OK at this
time. Go to Troubleshooting Intermittent Failures
(see page 24-37). If another DTC is indicated,
troubleshoot the DTC.
4. Calibrate the ODS unit (see page 24-40) or initialize
the ODS unit (see page 24-39).
5. Turn the ignition switch to LOCK (0), then wait for
10 seconds.
6. Turn the ignition switch to ON (II), then wait for 10
seconds.
7. Read the DTC (see page 24-36).
Is DT C 81-7 1, 81-7 8, 85-7 1, or 85-7 8 indicated?
−
YES Replace the ODS unit (see page 24-232). If
the DTC is still present, replace the SRS unit
(see page 24-223).
−
NO Intermittent failure, the system is OK at this
time. Go to Troubleshooting Intermittent Failures
(see page 24-37). If another DTC is indicated,
troubleshoot the DTC.
ＴＡ０８Ａ００Ｋ７９１０００Ｒ８１７１ＦＡＡＴ００
ODS Unit Does Not
ODS Unit Not Initialized
DTC 81-79: Front Passenger's Weight
Sensors Initial Check Failure
NOTE: Before doing this troubleshooting procedure,
review SRS Precautions and Procedures (see page
24-23) and General Troubleshooting Information
(see page 24-35).
1. Clear the DTC memory (see page 24-36).
2. Turn the ignition switch to ON (II), and check that
the SRS indicator comes on for about 6 seconds
and then goes off.
Does the SRS indicator stay on, and is DT C 81-7 9
indicated?
YES − Go to step 3.
NO − Intermittent failure, the system is OK at this
time. Go to Troubleshooting Intermittent Failures
(see page 24-37). If another DTC is indicated,
troubleshoot the DTC.
3. Turn the ignition switch to LOCK (0).
4. Make sure nothing is on the front passenger's seat.
5. Turn the ignition switch to ON (II), and check that
the SRS indicator comes on for about 6 seconds
and then goes off.
Does the SRS indicator go of f ?
YES − Remove the front passenger's seat assembly
(see page 20-180), then reinstall it, calibrate the
ODS unit (see page 24-40). Retry the
troubleshooting. If the problem is still present,
replace the ODS unit (see page 24-232).
NO − Intermittent failure, the system is OK at this
time. Go to Troubleshooting Intermittent Failures
(see page 24-37). If another DTC is indicated,
troubleshoot the DTC.
ＴＡ０８Ａ００Ｋ７９１０００Ｒ８１７９ＦＡＡＴ０１
24-169 24-169