Honda Accord 2008 Manual page 2738

07/11/02 09:43:03 61TA0000_240_0015
4. 2-door: Remove the bolts (A) and clips (B), then
carefully move the side curtain airbag (C) aside to
gain access to the retractor bolt (D).
＊０２
Fastener Locations
A
6 x 1.0 mm
11 N·m
(1.1 kgf·m, 8.0 lbf·ft)
D
5. Remove the retractor mounting bolt (A) and
retractor bolt (B), then remove the rear seat belt (C)
and the retractor (D). 4-door is shown; 2-door is
similar.
＊０３
B
7/16-20 UNF
32 N·m
(3.3 kgf·m, 24 lbf·ft)
: Bolt, 2 B : Clip, 2
B
A
A
B
D
A
6 x 1.0 mm
9.8 N·m (1.0 kgf·m, 7.2 lbf·ft)
6. Install the rear seat belt and retractor in the reverse
order of removal, and note these items:
• Apply medium strength liquid thread lock to the
anchor bolts before reinstallation.
• 2-door: Replace the removed side curtain airbag
mounting bolts with new ones.
• Check that the retractor locking mechanism
functions (see page 24-17).
C
• Before installing the anchor bolt, make sure there
are no twists or kinks in the rear seat belt.
C
(cont'd)
24-15