Table of Contents
Advertisement
4-4. Threading the machine head
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the
sewing machine.
❷
❷
❸
❸
❹
❹
Put sewing machine thread ❶ on thread stand
1)
❷ .
❶ ❶
2)
Pass the thread as illustrated in the figure.
Insert the tip of the thread into the hole in upper
rubber ❸ of the needle bar.
Press Threading switch ❹ located at the lower
3)
left of the operation panel. The thread comes
out from the hole in the needle bar. Then, thread
the needle and draw out the thread end through
the needle eyelet by 50 to 60 mm.
– 29 –
Advertisement
Table of Contents
