Keyboard Bracket Assembly - JUKI KE-750 Setup Manual

10. Keyboard Bracket Assembly

(1) Disconnect the keyboard connection cable from the main unit.
(2) Remove four stopper screws fixing the keyboard attachment plate, then the keyboard
bracket assembly from the main unit.
(3) Push down the key board stands L and R inside, wrap the whole key board bracket
assembly with air cap completely, and pack it in the same carton box where the other
supplied parts are packed.
Keyboard
attachment plate
Figure 10.1
Keyboard connection cable
Keyboard stand L
Stopper
screws
- -
13
Keyboard stand R
Figure 10.2