REP 4.3
DEVELOPER DRIVE
MOTOR BELTS
PARTS LIST ON PL 4.5
REMOVAL
WARNING
Switch the Main Power off and disconnect the
Power Cord.
1. Remove the following:
a. Print Drum Module.
b. Color Developer Module.
c. Black Developer Module.
d. Right Side Cover (REP 1.3).
e. Top Cover (REP 1.1).
f.
Rear Cover (REP 1.2).
2. Remove
the
Main
Drive
(REP 4.2).
3. (Figure 1): Remove the Outer Drive Frame.
a. Remove the Pulley.
b. Remove the 4 Clutch Covers
c. Remove the E Rings and Screws and
then remove the Outer Drive Frame.
REPAIRS/ADJUSTMENTS
REP 4.3
Outer Drive
Frame
Motor
Belts
Pulley
Figure 1. Removing the Outer Drive Frame
4. (Figure 2): Remove Developer Drive Belt C.
Clutch
Covers
Figure 2. Removing Developer Drive Belt C
5. (Figure 3): Remove Developer Drive Belt D.
E10
Figure 3. Removing Developer Drive Belt D
2/99
4-10
Belt C
E15
Belt D
E16
DocuPrint C55/C55mp/[NC60]