Rep 12.68 Finisher Pwb - Xerox Phaser 7760 Service Manual

c. Remove the Eject Chute Assembly
Figure 4 Removing Eject Chute Assembly
Repairs and Adjustments
REP 12.67, REP 12.68
(Figure 4).

REP 12.68 Finisher PWB

Parts List on PL 21.12
Removal
1. Remove the Finisher Rear Upper Cover
2. Remove the Finisher Rear Lower Cover
3. Remove the 4 screws securing the Finisher PWB
Figure 1 Removing Advanced/Professional Finisher PWB Cover
4. Removing the Finisher PWB
a. Disconnect the wiring harness connectors (Advanced Finisher - 13, Professional
Finisher - 17).
b. Remove the 6 screws and remove the PWB.
January 2010
4-88
(REP 12.41).
(REP 12.42).
(Figure 1).
(Figure 2).
Phaser 7760 Color Laser Printer
Revised