System Messages - Auerswald COMpact 5000 Operation Manual

Settings

System messages

Assigning a Language File
System messages
System messages are used to inform administrators and users about system events such as
operating errors. Every event that happens in the system is logged. E-mails with information
about the events can also be sent out.
The following different types of system event are possible:
• system information, e.g. automatic memory clean-up and memory check (Voice Mail/Fax
function), switch between configurations, switch relays on/off, send system e-mails, register
in Configuration Manager
• simple malfunctions, e.g. automatic memory clean-up and memory check (Voice Mail/Fax
function) errors
• serious malfunctions, e.g. fan fault (only COMpact 5000R), alarm temperature exceeded
• security warnings, e.g. failed logon attempts, entries in the IP blacklist, Admin password
change
Proceed as follows to set up system messages:
• Configure DNS server.
– Using the Configuration Manager (page Administration > IP configuration
• Configure outgoing mail server.
– Using the Configuration Manager (page Administration > E-mail > Outgoing Mail
Server)
• If necessary, set up the language file.
– Using the Configuration Manager (page Administration > E-mail > Internationali-
sation)
• If necessary, set up the logo.
– Using the Configuration Manager (page Administration > E-mail > Logo
management)
• Set up the sending of system e-mails and event logging.
– Using the Configuration Manager (on the following pages)
– Administration > System messages
– Devices > Voice mail/fax boxes
– Devices > Voice mial/fax boxes > Properties > Box settings
684
COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016