SINAMICS S120 Fail-Safe Drives
6.5
Parameterizing the control of the safety functions (TM54F)
Description
Open the safety configuration
window in STARTER under
Input/output component / TM54F /
Safety Integrated.
Go online.
Click on "Change settings" (this is
only possible in the online mode!).
Enter a security password (When
commissioning the system for the
first time: "0").
Click on "Configuration".
I DT Safety Integrated
Page 34/43
Entry ID: 28424136
Comment
MC-FE-I-005-V11-EN