Figure 5-22 12Lk-L Kit; Installing Line Key Kit (12Lk-L Kit) - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
4.5
System Hardware Manual

Installing Line Key Kit (12LK-L KIT)

The 12LK-L KIT Provides 12 additional buttons to ITL or DTL multiline
terminals. The 12LK-L KIT kit:
 Mounts directly to top side of terminal
 Supports Red and Green LED colors
4.5.1 Installing the 12LK-L KIT
To prevent possible damage to the 12LK-L KIT or
the DTL/ITL multiline terminal during installation
or removal, disconnect the line cord/LAN cable
and the AC/DC adapter from the DTL/ITL
multiline terminal.
1. Turn multiline terminal upside down.
 Only one 12LK-L KIT can be attached to the DTL/ITL multiline
terminal.
2. Pry the right side panel from the multiline terminal.
3. From the lower left or right corner, pry the Line Key Panel from
the multiline terminal (refer to
Key Panel on page

Figure 5-22 12LK-L Kit

Figure 5-23 Removing the Line
5-30).
Issue 2.0
5 - 29