Figure 3-51 Secure Metal Fitting To Upper Wall Mount Bracket With A Screw - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
6. Align the metal fitting with the upper wall mount bracket. The
lower metal fitting rests against the lower wall mount bracket.
Secure the metal fitting and upper wall mount bracket with a
single screw.
Figure 3-51
7. Using two screws, secure the metal fitting to the lower wall
mount bracket. Refer to
Lower Wall Mount Bracket with Screws on page 3-44
location.
Secure Metal Fitting to Upper Wall Mount Bracket
with a Screw
Figure 3-52 Secure Metal Fitting to
Issue 2.0
for screw
3 - 43