Figure 6-61 Base Coverage Area; Map The Base Coverage Area - NEC Univerge SV8100 System Hardware Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

System Hardware Manual

To find the best location for the repeater, you need to determine the

base coverage area. Stand near the base and make a call. Walk

away from the base with the handset, and make a note where the

signal becomes weaker. The optimum location for the repeater is as

far from the base as possible while still maintaining a good signal, or

just inside the location where the signal became weaker.

Test the Location

To test the location, plug the AC adapter into the repeater, then hold

the repeater in the place where you plan to mount it. The LED should

remain on and steady, indicating that the repeater has a good signal

from the base.

If the LED flashes, the repeater is not getting a good signal. The

repeater may be too far away from the base, there may be

interference from electronic devices, or the signal might be blocked

by thick walls or metal objects. Try moving the repeater to another

Figure 6-61 Base Coverage Area