Figure 6-22: Attaching The Bottom Tabs Of The Multiline Terminal To The Base Cover; Figure 6-23: Attaching The Top Tabs Of The Multiline Terminal To The Base Plate - NEC Xen alpha Installation Manual

8.
9.
Installation Manual, Chapter 6 – Installing DTU-Type Multiline Terminals
November 2003, A6-506000-642-01(8508), Release 6.0
With the base plate and base cover assembly attached to the wall, hook the two
bottom tabs on the base cover into the tab slots on the base of the
Multiline Terminal.
Wall
Tab

Figure 6-22: Attaching the Bottom Tabs of the Multiline Terminal to the Base Cover

Push up on the Multiline Terminal and lock the top tabs on the base cover into the
tab slots on the base of the Multiline Terminal. Turn terminal slightly clockwise to
interface with base cover. Figure 6-23: Attaching the Top Tabs of the Multiline
Terminal to the Base Plate shows how the Multiline Terminal is attached.
Tab Slots
Tabs
Wall

Figure 6-23: Attaching the Top Tabs of the Multiline Terminal to the Base Plate

Base Unit
Wall Mount
Multiline
Terminal
Line Cord
Tab Slots
Multiline
Terminal
Line Cord
Unit
137