NEC Univerge SV8100 System Hardware Manual page 438

Hide thumbs Also See for Univerge SV8100:

Table of Contents

Keep the following in mind when installing DSS Consoles:

A 60-Button DSS Console requires a separate digital station port

when pairing with a digital multiline terminal. For IP terminals, the

console is connected to the side option slot using a special cable.

Installing the DCL-60-1 CONSOLE

Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals

Figure 5-74 DCL-60-1 CONSOLE

To prevent possible damage to the

DCL-60-1 CONSOLE or the DTL/ITL

multiline terminal during installation or

removal, disconnect the line cord/LAN

cable and the AC/DC adapter from the

DTL/ITL multiline terminal.

Remove both plastic panels from the front of the

multiline terminal.

Turn multiline terminal upside down.

Only one DCL-60-1 CONSOLE can be attached to the

DTL/ITL multiline terminal.

UNIVERGE SV8100