Issue 2.0
6 - 62
21.
Reinstall the legs, pushing upwards until both locks snap into
place.
22.
Set tilt legs to desired position.
23.
Place the multiline terminal with the numbered keypad up.
24.
Connect the Line cord and the AC adapter.
25.
Place the Bluetooth handset in the cradle.
Before you use the handset for the first time or reuse the handset after
it has been left out of service for a long time, charge it for at least five
hours. A full charge takes approximately 16 hours.
26.
Erect the antenna (refer to
Installed).
Figure 6-76 Bluetooth Handset Installed
UNIVERGE SV8100
Figure 6-76 Bluetooth Handset
Installing SV8100 Cordless Telephones