Figure 11-6 Ad(A)-R Unit; Figure 11-7 Connecting A Multiline Terminal To A Recording Device Using An Ad(A)-R Unit (Example) - NEC Univerge SV8100 System Hardware Manual

Issue 2.0 UNIVERGE SV8100
3.2 AD(A)-R Unit (Ancillary Device Adapter)
This Ancillary Device Adapter, shown on Figure 11-6 AD(A)-R Unit, allows
connection of a tape recorder to all multiline terminals except the DTR-2DT-1.

Figure 11-6 AD(A)-R Unit

Figure 11-7 Connecting a Multiline Terminal to a Recording Device using an
AD(A)-R Unit (Example) illustrates how the AD(A)-R Unit is connected to the
ESI(8)-U( ) ETU and to the recording device.
Multiline Terminal + AD(A)-R Unit
Recording
ESI
Device
ETU
Line Cord Mini-Plug Mini-Plug
(2-line) Connection Cord
Figure 11-7 Connecting a Multiline Terminal to a Recording Device using an
AD(A)-R Unit (Example)
When installing the AD(A)-R Unit, connect the cables to the AD(A)-R Unit, set
the dip switches, and install the AD(A)-R Unit on the multiline terminal.
term
11 - 6 Installing D Series i Optional Equipment