Figure 9-48 Ada-L Unit - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
12.3
System Hardware Manual
ADA-L UNIT
Using the ADA-L UNIT (Ancillary Device Adapter) provides a recording jack
connection from a telephone to an external tape recorder, speaker or PC.
Both sides of the conversation are recorded. The adapter output is a 1/8"
audio (stereo) jack which you can connect directly to an AUX level input on a
recorder or page amplifier.
Recording a conversation (Handset/Headset/Hands-free), or sending
recorded calls to a telephone are possible by connecting a cassette recorder
to the ADA-L UNIT (voice recording and the playback of a recorded sound
from a cassette recorder cannot occur at the same time).
Before installing or removing the adapters, the multiline terminal should be
unplugged from the system.
Be sure the connected audio device provides a standard
AUX level input.
The use of monitoring, recording, or listening devices to
eavesdrop, monitor, retrieve, or record telephone
conversation or other sound activities, whether or not
contemporaneous with transmission, may be illegal in
certain circumstances under federal or state laws. Legal
advice should be sought prior to implementing any practice
that monitors or records any telephone conversation. Some
federal and state laws require some form of notification to
all parties to a telephone conversation, such as using a beep
tone or other notification methods or requiring the consent
of all parties to the telephone conversation, prior to
monitoring or recording the telephone conversation. Some
of these laws incorporate strict penalties.
The handset records only when a call is placed or answered.
12.3.1 ADA-L UNIT Switch Settings

Figure 9-48 ADA-L UNIT

switches (DSW) allow a technician to configure the unit for specific
settings.
Due to location, set switches prior to installation of
ADA-L UNIT on DTL/ITL multiline terminal.
shows the location of the switches. The dip
Issue 2.0
9 - 71