Figure 6-13 Placing The Base Unit On The Posts Of The Wall Plate; Figure 6-14 Plugging The Ac Adapter Into The Wall Outlet - NEC Univerge SV8100 System Hardware Manual

Issue 2.0
6 - 14
5. Plug the other end of the short telephone cord in the modular wall jack in
the center of the wall plate.
6. Place the base unit on the posts of the wall plate and push down until it
is firmly seated.

Figure 6-13 Placing the Base Unit on the Posts of the Wall Plate

7. Plug the AC adapter into a standard 120 Vac wall outlet.

Do not use an outlet controlled by a wall switch.
AC
Adapter

Figure 6-14 Plugging the AC Adapter into the Wall Outlet

Wide Blade
Installing SV8100 Cordless Telephones
UNIVERGE SV8100