UNIVERGE SV8100
System Hardware Manual
5.
Align the PZ-BS11 blade with the guides located
within the expansion bay.
Guides
Figure 3-43 PZ-BS11 Blade Guides
6.
Slide the PZ-BS11 blade into the chassis until
resistance (back plane) is felt.
Retaining
Screw
Figure 3-44
7.
Install the supplied retaining screw (refer to
3-44 Installing PZ-BS11 Blade in Expansion
Chassis).
8.
Remove knockout in center of cover.
Installing PZ-BS11 Blade in
Expansion Chassis
Issue 2.0
Figure
3 - 35