Figure 5-37 Remove Plastic Panels; Figure 5-38 Remove The Ten Key Kit; Removal And Replacement Of The Bs( )-L Kit Ten Key Kit) - NEC Univerge SV8100 System Hardware Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

Removal and Replacement of the BS( )-L Kit (Ten Key Kit)

The Business BS( )-L Kit (in black or white), is commonly delivered with the

UNIVERGE SV8100 multiline terminal. If required, the BS( )-L Kit can be

removed and replaced on the DT300/DT700 Series multiline terminal.

The Retro BS( )-L Kit is an optional kit available to be used with the IPK II and

IPS terminals.

Remove the BS( )-L Kit

Pry the right side panel from the multiline terminal (refer to

5-37 Remove Plastic

Remove the Numbered Keypad panel. (Refer to paragraph

Figure 5-38 Remove the Ten Key Kit on page

Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals

Figure 5-37 Remove Plastic Panels

UNIVERGE SV8100

Desi Printer