UNIVERGE SV8100
4.2
System Hardware Manual
Wall Mounting the 9.5" Gateway (CHS2U GW-US) and Base
(CHS2U B-US) Chassis
When wall mounting the chassis, ensure the wall can support the weight of the
chassis and (25 lbs per system chassis ---- including blades, cords, power
supply, etc.). The chassis is secured to the wall with a wall mount bracket.
Optional wall mounting brackets exist for the 9.5" chassis (refer to
Optional Wall Mounting Brackets for 9.5"
mounting bracket is secured to the wall and the chassis attached to the
bracket. Option 2 attaches the bracket to the 9.5" chassis and then, using the
key-holes as a guide, the assembled unit slides over screws secured to the
wall using the template shown in
Chassis) on page
3-48.
Figure 3-55 Optional Wall Mounting Brackets for 9.5" Chassis
Chassis). Option 1 attaches the
Figure 3-56 Wall Mount Spacing Guide (9.5"
Issue 2.0
Figure 3-55
3 - 47