Figure 9-23 Voice Security Recorder Installation-3; Vsr Application Software - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual

Figure 9-23 Voice Security Recorder Installation-3

4. The software is fully tested, but has not yet been submitted to Microsoft
for approval. Press Continue Anyway.
5. Press Finish to close the dialog box.
6. Run SBladep.exe on your NEC Installation CD to install the D
Voice Security Recorder application software on your PC.
7. Using the USB cable provided, connect the USB interface of the NEC
VSR unit to an available USB port on your PC.
8. Unplug the line cord from your telephone and connect the phone to
either port on the D
9. Connect the NEC telephone system to the remaining port on the D
VSR unit (refer to
page 9-44).
11.3.1

VSR Application Software

The VSR software is delivered on a Compact Disk using a
self-starting install shield. The CD contains all applicable files and
installation procedures to operate to this specification, including USB
device drivers, software application, and Help files.
term
VSR unit.
Figure 9-34 Voice Security Recorder Connection on
Issue 2.0
term ®
term
9 - 33