Figure 5-106 Installing The Utr-1-1 Usb Handset To A Pc; Figure 5-107 Wall Mounting The Utr-1-1 Usb Handset - NEC Univerge SV8100 System Hardware Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

System Hardware Manual

USB Connection

Plug a USB cable (type A connector) into the back of the cradle. Plug

the USB cable (type B connector) in the USB port of a PC.

Figure 5-106 Installing the UTR-1-1 USB Handset to a PC

Wall Mounting

The UTR-1-1 USB handset can be mounted on the wall using a wall

plate or two screws. Align the two holes on the back of the UTR-1-1

and slide down onto the wall plate or screws.

Because of variation in wall plates, this method is not recommended.