Headsets Used With D - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
10.3
System Hardware Manual
Switch from Handset to Headset
When you are using the handset during a call and want to switch to
the headset:
1. Press the headset Talk Button, and the headset can be used.
2. Place the telephone handset on the multiline terminal.
3. When finished, press the Headset Talk Button to end the call.
10.2.6 System Reset
To recover from some faults, system reset may be necessary. To
perform system reset:
1. Press both the Talk Button and Mute Control Button on the
headset for five seconds.
2. When the Talk Indicator blinks release both buttons.
3. Press the Talk Button again.
4. Disconnect the AC Power Adapter from the jack for five
seconds and then plug it back in.

Headsets Used with D

A multiline terminal user can use a customer-provided headset in place of the
handset. Like using Handsfree, using the headset frees up the user's hands
for other work. However, Headset Operation provides privacy not available
from handsfree.
The headset plugs into a separate jack on the bottom of the phone. This
allows the use of the handset or headset – whichever is more convenient at
the time.
Connect the headset in the headset jack located on the bottom of the multiline
terminal. (This jack is located next to the handset jack, so make sure to
connect to the proper jack.)
term ®
Telephones
Issue 2.0
6 - 77