Issue 2.0
3.4
3 - 22
Installing the 9.5" Gateway (CHS2U GW-US) and Base
(CHS2U B-US) Chassis
The CHS2U GW-US and the CHS2U B-US chassis have three universal blade
slots for station, trunk and optional blades.
Before proceeding with installation of chassis, ensure site preparation is
completed. The Gateway (CHS2U GW-US) chassis can be:
Wall-mounted – refer to
GW-US) and Base (CHS2U B-US) Chassis on page
Stand-mounted – refer to
GW-US) and Base (CHS2U B-US) Chassis on page
The Base (CHS2U B-US) chassis can be:
Wall-mounted – refer to
GW-US) and Base (CHS2U B-US) Chassis on page
Stand-mounted refer to
GW-US) and Base (CHS2U B-US) Chassis on page
From the factory, the SG, ETH and PBXG grounds are located inside the
chassis and are connected to the FG (frame ground) on the back of the
chassis.
Figure 3-25 9.5" Chassis (Front View)
4.2 Wall Mounting the 9.5" Gateway (CHS2U
6.2 Stand Mounting the 9.5" Gateway (CHS2U
4.2 Wall Mounting the 9.5" Gateway (CHS2U
6.2 Stand Mounting the 9.5" Gateway (CHS2U
Installing the SV8100 Chassis
UNIVERGE SV8100
3-47.
3-77.
3-47.
3-77.