Figure 6-41 Polarized Plug; Mounting The Base To A Standard Wall Plate - NEC Univerge SV8100 System Hardware Manual

Issue 2.0
6.5
6 - 34
Use only the supplied AC adapter for the charging unit.
The AC adapter furnished with this telephone usually has a polarized line plug
with one blade wider than the other. This plug fits in the power outlet only one
way. If you cannot insert the plug fully in the outlet, try reversing the plug.
Refer to Figure 6-41 Polarized
If you cannot plug the AC adapter in the outlet, you may need to replace it.
Route the power cord where it can not create a trip hazard,
or where it could become chafed and create a fire or other
electrical hazards.

Mounting the Base to a Standard Wall Plate

The base unit can be mounted on a standard wall plate. To attach the wall
mount stand to the base unit:
1. Slide the wall mount stand in the notches at the top of the base unit.
Rotate the wall mount stand down and snap it into place.
Plug.

Figure 6-41 Polarized Plug

Installing SV8100 Cordless Telephones
UNIVERGE SV8100