Table 2-3 Sv8100 9.5" (Base And Expansion) Maximum System Capacities - Trunks/Ports/Channels - NEC Univerge SV8100 System Hardware Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

The maximum slot and channel capacities are listed in

and Expansion) Maximum System Capacities –

Table 2-3 SV8100 9.5" (Base and Expansion) Maximum System Capacities – Trunks/Ports/Channels

Number of Timeslots

Analog Trunks (COT)

IP Trunk (SIP/K-CCIS – IP)

DTMF Receivers

VoIP Channels

Voice Mail Channels on CPU

1 = For-law countries 104 timeslots per chassis are assigned the G.711 PCM communications (e.g., voice

communications) and 7 timeslots per chassis are assigned for the Data communications (e.g., HDLC over ISDN).

Thus the simultaneous data communications are limited up to seven per chassis.

2 = An additional 64 DTMF Receivers are available when the PZ-BS10 is installed.

An additional 64 DTMF Receivers are available when the PZ-BS10 is installed.

If using Caller ID to analog trunks and DSP resources are set to common, DSP resources will only be used for analog

trunks and not analog stations.

System Hardware Manual

9.5" Base + Expansion

Table 2-3 SV8100 9.5" (Base

Trunks/Ports/Channels.