Table 4-48 Cd-Ccta Led Indications; Installation - NEC Univerge SV8100 System Hardware Manual

Issue 2.0
4 - 106
Refer to the following tables for maximum upgrade capacities of the
CD-CCTA blade:
Table 2-6 SV8100 Maximum 9.5" Gateway and 19" System Capacities

– Blades on page 2-13
Table 2-7 SV8100 Maximum 9.5" Base and Expansion System

Capacities – Blades on page 2-15
6.3.2

Installation

Install the CD-CCTA in any universal slot.
6.3.3 LED Indications
LED indications for the CD-CCTA are listed in
LED Indications. Each LED is listed with its associated function and
LED and Operational status. Refer to
Indication Pattern of Layer 1 on T1 Unit on page 4-107
pattern information.
Alarm
LOS Loss of Signal (Red Alarm)
No Signal (Analog Interface)
AIS Alarm Indication Signal
(Blue Alarm)
OOF Out Of Frame (Red Alarm)
RAI Remote Alarm Indication
(Yellow Alarm)
No Alarm The system does the LED control.

The order of priority is set up to alarm in the order LOS

Table 4-48 CD-CCTA LED Indications

Details of the Alarm
UNIVERGE SV8100
Table 4-48 CD-CCTA
Figure 4-46 CD-CCTA LED
for LED
LED Indication Pattern
Following an alarm blink (red,
green, red, green) a Red LED
lights.
Following an alarm blink (red,
green, red, green) a Red LED
slowly flashes On and Off twice.
Following an alarm blink (red,
green, red, green) a Red LED
and Green LED flash On and
Off three times simultaneously.
Following an alarm blink (red,
green, red, green) a Green LED
flashes On and Off twice.
  
AIS OOF RAI.
Installing the SV8100 Blades