Figure 3-141 Chs Large Batt Box To Chs2U Gw-Us Or Chs2U B-Us Connection; Chs Large Batt Box Fuse Replacement - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
P
S 9
OWER
ECTION
System Hardware Manual

Figure 3-141 CHS LARGE BATT BOX to CHS2U GW-US or CHS2U B-US Connection

6. Reconnect AC power cable to rear of 9.5" chassis.
7. To power on the 9.5" chassis, refer to
Up the SV8100 System on page
8.4.3

CHS LARGE BATT BOX Fuse Replacement

To replace the fuse(s) in the CHS LARGE BATT BOX, refer to
Chapter 3, section
on page
S
UPPLY
Do not attempt to replace the power supply on the CHS2U-US or
CHS2U GW-US chassis. The MPS7101 is not a field replaceable
part. If the power supply fails, contact NEC.
8.2.4 CHS LARGE BATT BOX Fuse Replacement
3-101.
Issue 2.0
Chapter 4, 2.6 Powering
4-9.
3 - 111