Slot Locations - NEC Univerge SV8100 System Hardware Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

Installing the SV8100 Blades

This chapter contains information to help the technician install the blades

for the UNIVERGE SV8100 system. The technician should be familiar with

this section before installing any equipment.

System Hardware Manual

Slot Locations

Each CHS2U-US has six slots. In the Controlling Chassis, the

CD-CP00-US (for Key Systems) must be installed in the first slot

(slot 1). In the CHS2U GW-US and CHS2U B-US, the

CD-CP00-US must be installed in the first slot (slot 1).

Slot Locations in the CHS2U-US (19" Controlling Chassis):

Slot 1 – dedicated for the CPU

Slots 2~6 – universal

Slot Locating in the CHS2U-US (19" Expansion Chassis):

Slots 1~6 are universal. (i.e., any type of blade except the CPU

can be installed in these slots).

Slot Locations in the CHS2U GW-US and CHS2U B-US Base

(9.5" Chassis):

Slot 1 – CPU

Slots 2 and 3 – universal

Slot Locations in the 9.5" CHS2U B-US and CHS2U E

(Controlling Chassis with CPU):

Slot 1 – CPU

Slots 2~6 – universal

Slot Locations in the 9.5" CHS2U B-US and CHS2U E

(Expansion Chassis no CPU):

Slots 1~6 – universal