Figure 5-44 Adjust Height Of Dt300/Dt700 Series Terminal; Adjusting The Height On The Multiline Terminal - NEC Univerge SV8100 System Hardware Manual
Hide thumbs
Also See for Univerge SV8100:
- Features and specifications manual (2210 pages) ,
- Features & specifications manual (1174 pages) ,
- Programming manual (986 pages)
Table of Contents
Advertisement
Issue 2.0
4.10
5 - 48
Adjusting the Height on the Multiline Terminal
The height of the DT300/DT700 Series multiline terminals can be adjusted by
moving the legs attached to the bottom of the terminal.
1.
Turn telephone over (button side down).
2.
Adjust legs to desired height (refer to
DT300/DT700 Series
Figure 5-44 Adjust Height of DT300/DT700 Series Terminal
3.
Turn telephone over (button side up).
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
Figure 5-44 Adjust Height of
Terminal).
UNIVERGE SV8100
Advertisement
Table of Contents
