Figure 6-51 Placing The Charging Unit On The Wall; Figure 6-52 Attaching The Belt Clip To The Handset; Attaching And Removing The Belt Clip - NEC Univerge SV8100 System Hardware Manual

Issue 2.0
6.8
6 - 40
3. Place the charging unit on the posts of the wall screws and push down
until it is firmly seated.

Figure 6-51 Placing the Charging Unit on the Wall

4. Plug the AC adapter into a standard 120 Vac wall outlet. Refer to
6-51 Placing the Charging Unit on the

Attaching and Removing the Belt Clip

A belt clip can be used to attach the handset to a belt or pocket for convenient
portability.
1. Slide the clip into the tab slots. Press firmly until it snaps into place. The
belt clip fits snugly onto the handset.

Figure 6-52 Attaching the Belt Clip to the Handset

UNIVERGE SV8100
Wall.
Installing SV8100 Cordless Telephones
Figure