Figure 3-103 Secure Cable In Support Bracket; Figure 3-104 Installing Cable Support Guide - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
5. Using tie wraps, secure CHS2U BATT CABLE INT in cable guide
bracket.

Figure 3-103 Secure Cable in Support Bracket

6. With supplied screw, install cable guide in chassis.

Figure 3-104 Installing Cable Support Guide

7. Install two 2.3 AH-12V batteries (locally procured) into the CHS2U BATT
MTG KIT (refer to

The first battery must be installed on the left side, then slid to the right due to an
installation tab on the mounting kit.
Figure 3-105 Installing Two Batteries on page
Issue 2.0
3-90).
3 - 89