Table 5-3 Firmware Compatibility Matrix; Table 5-4 Dt330 Compatibility Settings - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
Terminal
Console:
DCL-60-1 (BK)/(WH) CONSOLE
— = Option Not Available

= Optional Available
Terminal xxx I xx or lower
Lot
(Version 8.10 and 1, E0 or lower)
Number
xxxJxx or higher
DT-330
(Version 2.20 or higher)

BCH Support may differ based on terminal firmware. To verify both DT-330 terminal and BCH-L Unit firmware, hold
down keypad buttons 1, 2 and 3 while plugging the line cord into the terminal.
ADA-L Unit Switch
Settings
ADA Connection for
Recording Only.
ADA Connection for
Sending Recorded
Calls to the Telephone.
To Send and Receive
to the Terminal
Lot Numbers: I, J – Hardware Revision
Lot Numbers: L, M, S – Software Revision

To verify DT-330 terminal firmware, hold down keypad buttons 1, 2 and 3 while plugging the line cord into the terminal.
System Hardware Manual
Table 5-2 Terminal and Adapter Compatibility (Continued)
ADA-L
—

Table 5-3 Firmware Compatibility Matrix

Table 5-4 DT330 Compatibility Settings

xxx I Lx or lower
(Version 1.E0 or lower)
Dip switches 1, 2, 3, 5, 7
and 8 are OFF. Switches
4 and 6 are ON.
Dip switches 2, 3, 5, 7
and 8 are OFF. Switches
1, 4 and 6 are ON.
Not supported
Adapter Unit
APR-L ILPA PSA-L
— — —
BCH-L Unit Lot Number
xxxDxx or lower
Supported
Not supported
Terminal Lot Number DT-330
xxx I Mx
(Version 8.10)
Dip switches 1, 2, 3, 5, 7
and 8 are OFF. Switches
4 and 6 are ON.
Dip switches 2, 3, 5, 7
and 8 are OFF. Switches
1, 4 and 6 are ON.
Dip switches 1, 2, 3, 5, 7
and 8 are OFF. Switches
4 and 6 are ON.
Issue 2.0
BCH-L BHA-L GBA-L
  
xxxExx or higher
Supported
Supported
xxxJSx or higher
(Version 2.20 or higher)
Dip switches 1, 2, 3, 5, 7
and 8 are OFF. Switches
4 and 6 are ON.
Dip switches 2, 3, 5, 7
and 8 are OFF. Switches
1, 4 and 6 are ON.
Dip switches 1, 2, 3, 5, 7
and 8 are OFF. Switches
4 and 6 are ON.
5 - 5