Operation; 22-Button And 34-Button Display Telephone - NEC DS1000 Release Notes

Operation

DS1000 Release Notes
When 1003-Tandem Trunking is disabled, the system will immediately route a trunk ringing an
OPX Call Forwarded extension to Key Ring. It will not attempt to reroute the call.
1702-Personal Speed Dial
You can optionally enter Personal Speed Dial numbers from the system program. The Personal
Speed Dial number you enter for Off Premise Call Forwarding must contain a trunk or trunk group
route. You cannot select Intercom Speed Dials for Off Premise Call Forwarding.
1801-Extension Class of Service
Assign Class of Service to extensions.
1802-Speed Dial Block
Assign a Speed Dial block (1-62) to an extension. If the extension does not have a block assigned,
it cannot use Off Premise Call Forwarding. If the extension does not have a Speed Dial block
assigned, the Call Forwarding Off Premise option is not available (i.e., is hidden on the display).
Note: Also see Call Forwarding in the Enhanced Features section for information on the new Call
Fowarding key. This key significantly simplifies Call Fowarding feature operation.
22-Button and 34-Button Display Telephone Operation
To set up Call Forwarding Off Premise:
1. Press the ICM key and dial *3 .
OR
Press PGM + CFWD . You see:
2. Dial 3 and skip to step 5.
OR
Press MORE . You see:
3. Press OFFP .
4. You see:
- Press BIN to select a Speed Dial bin as your Off Premise Call Forwarding number.
- Press NUM to store a new Off Premise Call Forwarding number (automatically in bin 720).
- Press VIEW to view the currently enabled Off Premise Call Forwarding number (if any).
5. If you press BIN to store the number in a Speed Dial bin, you see:
- Select the Speed Dial bin (dial 701-720 or press the bin key) you want to use + HOLD to exit.
OR
DS1000 02.10.09 Release Notes
New Features in 02.10.09
5 N 02.10.09