Table 8-1 Conference Max Keypad Functions; Table 8-2 Conference Max Programming Options - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
2.3
2.4
System Hardware Manual
Keypad Functions
Refer to Table 8-1 Conference Max Keypad

Table 8-1 Conference Max Keypad Functions

Key
ON/OFF key
(telephone icon)
PHONEBOOK (book
icon)
REDIAL (circular
arrow icon)
CONFERENCE
(three person icon)
FLASH (lightning
flash icon)
CLEAR (vertical line
and left arrow icon)
VOLUME (loud and
dim speaker icons)
MUTE (mic with
diagonal line icon)
Programming Options
To enter Programming mode, press and hold REDIAL until a diamond arrow is
displayed on the LCD. Then press the applicable key and follow the
instruction in Table 8-2 Conference Max Programming

Table 8-2 Conference Max Programming Options

Menu Option Key
Ringer 1
Melody
Dialing Mode 2
Functions.
Press to activate the telephone and access dial tone.
Press again to hang up and return to standby mode.
Press to dial stored numbers. Press and hold two
seconds to enter Phonebook Edit mode.
Press once to dial the last number called. Press and hold
two seconds to enter Program mode.
Press to dial the conferencing service provider. This
feature must be programmed.
Press to enable call forwarding, call waiting, or three-way
calling when supported by telephone service.
Press to clear the last digit entered or press and hold to
clear all numbers.
Press to exit programming mode.
Press during call to adjust call volume or press while
telephone is ringing or in standby mode to adjust ringer
volume.
Press to mute volume.
Programming
Press REDIAL. The current melody selection flashes.
Press 1~5 to change melody. Press REDIAL to save the
selection.
Press REDIAL. The current dialing selection flashes.
Press 1 for tone or 2 for pulse. Press REDIAL to save
the selection.
Function
Options.
Issue 2.0
8 - 3