Figure 10-36 Removing The Multiline Terminal; Figure 10-37 Wall Mounting Base Plate On A Wall Plate; From The Base Plate - NEC Univerge SV8100 System Hardware Manual

Issue 2.0
10 - 26
11.1.3 Removing the Wall Mounted Multiline Terminal from the Base Plate
To remove the multiline terminal, press the tabs at the bottom as
shown in Figure 10-36 Removing the Multiline
on the Telephone until it comes loose.
11.1.4 Wall Mounting the Base Plate on a Wall Plate
1. Locate the screw holes on the base cover and hang the cover
over the screws on the wall plate as illustrated in
Wall Mounting Base Plate on a Wall

Figure 10-37 Wall Mounting Base Plate on a Wall Plate

Figure 10-36 Removing the Multiline Terminal

Installing D
UNIVERGE SV8100
Terminal, and push up
Figure 10-37
Plate.
term
Series i Telephones