Figure 6-47 Placing The Telephone Cords Inside The Wall Mount Stand; Figure 6-48 Attaching The Wall Mount Unit To The Wall - NEC Univerge SV8100 System Hardware Manual

Issue 2.0
6 - 38

Figure 6-47 Placing the Telephone Cords Inside the Wall Mount Stand

5. Place the base unit on the posts of the wall screws and push down until
it is firmly seated.

Figure 6-48 Attaching the Wall Mount Unit to the Wall

6. Plug the other end of the short telephone cord into a telephone wall jack.
7. Plug the AC adapter into a standard 120 Vac wall outlet. Refer to
6-45 Plugging the AC Adapter into the AC Wall Outlet on page
 Do not use an outlet controlled by a wall switch.
UNIVERGE SV8100
Installing SV8100 Cordless Telephones
Figure
6-36.