Program 22 : Incoming Call Setup; System Options For Incoming Calls - NEC SL1100 Programming Manual

ISSUE 6.0
Level:
IN
Description
Use Program 22-01 : System Options for Incoming Calls to define the system options for incoming
calls.
Input Data
Item Item
No.
01 Incoming Call
Priority
02 Incoming Call
Ring No Answer
Alarm
03 Ring No Answer
Alarm Time
04 DIL No Answer
Recall Time
06 DID Ring-No-An-
swer Time
07 DID Incoming
Ring Group No
Answer Time
08 DID Pilot Call No
Answer Time
09 DID to Trunk to
Trunk no answer
timer
10 VRS Waiting
Message Opera-
tion
Programming Manual

Program 22 : Incoming Call Setup

22-01 : System Options for Incoming Calls

Input Data
0 = Intercom Call Priori- Use this option to determine if Inter-
ty com calls or trunk calls have answer
1 = Trunk Call Priority priority when both are ringing simul-
taneously.
0 = Disable (Off) If enabled, an incoming call that
1 = Enable (On) rings longer than the Ring No An-
swer Alarm interval (22-01-03),
changes to a unique ring cadence to
indicate that the call has been ring-
ing too long. If disabled, this does
not occur.
0 ~ 64800 seconds If a trunk rings a multiline telephone
longer than this interval, the system
changes the ring cadence. This indi-
cates to the user that the call has
been ringing too long.
0 ~ 64800 seconds A DIL that rings its programmed
0 = No Overflow destination longer than this interval
diverts to the DIL No Answer Ring
Group (set in Program 22-08).
0 ~ 64800 seconds In systems with DID Ring-No-An-
swer Intercept, this sets the Ring-
No-Answer time. This time is how
long a DID call rings the destination
extension before rerouting to the in-
tercept ring group.
0 ~ 64800 seconds
0 ~ 64800 seconds
0 ~ 64800 seconds
0 = Automatic Opera- Set up the operation mode for Auto
tion Attendant and Queuing Message.
1 = Manual Operation
Description Default
SL1100
Program
22
Related
Program
1 15-02-22
0 22-01-03
22-01-04
60 22-01-02
0
20 22-12
20
60
20
0 22-14
22-15
22-08
22-04
22-01-04
20-15-11
15-07
2-255