Table 4-24 Cd-8Dlca/Cd-16Dlca Led Indications - NEC Univerge SV8100 System Hardware Manual

Issue 2.0
LED Indication
Live LED Busy LED
(Green) (Red)
On On
Flash (1s) On
Flash (1s)
On
Flash
(100ms)
Off
4 - 48
Refer to the following tables for maximum upgrade capacities of the
CD-8DLCA CD-16DLCA ESIU blades:
/
Table 2-6 SV8100 Maximum 9.5" Gateway and 19" System Capacities

– Blades on page 2-13
Table 2-7 SV8100 Maximum 9.5" Base and Expansion System

Capacities – Blades on page 2-15
4.1.2 Installation
The CD-8DLCA/CD-16DLCA blade can be installed in any universal
slot in the system and up to a maximum of 20 DLCA blades can be
installed per system, providing up to 320 digital ports.
To install the PZ-8DLCB
1. If installing the CD-8DLCA and the PZ-8DLCB daughter board
is to be attached, do it now. Refer to
4-51.
2. Each CNx01 connector (CN101, CN201, CN301, CN401) is
used to connect up to four digital extensions.
4.1.3 LED Indications
LEDs for the CD-8DLCA
CD-8DLCA/CD-16DLCA LED
associated function and LED and Operational status. Refer to
4-18 CD-8DLCA Blade on page 4-46
Blade on page 4-47

Table 4-24 CD-8DLCA/CD-16DLCA LED Indications

Operation Status
System Initializing
The assignment of the unit is refused.
Trouble found during self-diagnostics.
A Channel is busy (use
Normal
another from CH1 ~ CHx).
Operation
All channels are idle.
CD-16DLCA:
/
CD-16DLCA are described in
/
Indications. Each LED is listed with its
and
for the location of the LEDs on the blades.
–
When you exceed the system
capacity.
When the main software
version is not matched.
–
–
–
Installing the SV8100 Blades
UNIVERGE SV8100
4.2.2 Installation on page
Table 4-24
Figure
Figure 4-19 CD-16DLCA
Remarks