Figure 5-77 Press Serial Cable Into Groove; Figure 5-78 Securing The Dcl-60-1 Console With Screws - NEC Univerge SV8100 System Hardware Manual

Issue 2.0
5 - 70
7.
8.
9.
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
Carefully push the Serial cable into the Serial Cable
Groove (ITL, DT700 only).

Figure 5-77 Press Serial Cable into Groove

Using the guides, slide the DCL-60-1 CONSOLE
onto the installed bracket (refer to
Serial Cable into Groove).
Secure the DCL-60-1 CONSOLE to the bracket with
the two screws provided.
Figure 5-78 Securing the DCL-60-1 CONSOLE
with Screws
UNIVERGE SV8100
Figure 5-77 Press