Connecting The 9.5" Base And Expansion Chassis; Figure 3-28 Removing Backboard Cover - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
The 9.5" Base chassis provides up to 16 trunk ports or 32 extension ports. An
Expansion Chassis can be installed to the right of the Controlling or Base
Chassis providing an additional 48 ports (40 trunk/ 80 stations maximum) and
can include any combination of stations and trunks below this number. With a
maximum of four Base and four Expansion chassis the system will provide up
to 184 trunks and 320 extensions. With IP connections, a maximum of 200
trunk ports (maximum of 32/64/128 talk paths supported depending on IPLA
blade installed) and 512 station ports is possible.

The PZ-ME50-US blade is required as well as a license to support the expanded ports.
3.5.1

Connecting the 9.5" Base and Expansion Chassis

1. Ensure the 9.5" chassis (Base and Expansion) is powered off
and the AC power cord is unplugged.
2. Remove the Backboard Cover located on the right side of the
Base chassis (refer to
Cover).

Figure 3-28 Removing Backboard Cover

3. Using the three screws provided, attach the Expansion bracket
to the Base Chassis (refer to
Expansion Bracket on page
Figure 3-28 Removing Backboard
Backboard Cover
Figure 3-29 Installing the
3-26).
Issue 2.0
3 - 25