Figure 11-2 Removing The Multiline Terminal Base Plate - NEC Univerge SV8100 System Hardware Manual

Issue 2.0
3.
4.
11 - 2
Press down on the tabs indicated in
Terminal Base Plate, and push forward on the base plate to remove it.

Figure 11-2 Removing the Multiline Terminal Base Plate

When an adapter is installed for the first time, the base cover on the multiline
terminal must be modified. Two adapters can be installed in the multiline
terminal, and two separate cutouts are provided. Remove the applicable cutout/
cutouts on the bottom of the base plate. When only one adapter is being
installed and it needs an AC-2R/AC-3R Unit for power, remove only the right
cutout as shown in Figure 11-3 Modifying Base Plate for Adapter
Figure 11-2 Removing the Multiline
term
Installing D Series i Optional Equipment
UNIVERGE SV8100
Installation.