Figure 9-65 Insert Stopper For Handset Use; Figure 9-66 Insert Connector For Handset Use - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
11. Connect the serial connection cord (refer to
PSA-L UNIT to the Multiline Terminal on page
PSA-L UNIT to the terminal body.
12. Open the Dip Switch Cover (refer to
Connections on page
adapter to the required position. Close the cover.
13. If using the handset, place the stopper in the tilt leg.

Figure 9-65 Insert Stopper for Handset Use

14. For the Handset, set the connector in place.

Figure 9-66 Insert Connector for Handset Use

Figure 9-59 PSA-L UNIT
9-81). Set the dip switch on the PSA-L
Issue 2.0
Figure 9-63 Attach
9-84) from the
9 - 85