Figure 10-39 Attaching The Wall Mount Unit To The Wall - NEC Univerge SV8100 System Hardware Manual

Issue 2.0
S 12 W
ECTION ALL
(WM-R U
The Wall Mount Unit is used to attach any DTH/DTR connection multiline terminal
(except the DTR-2DT-1 TEL) to the wall. This unit connects to the back side of the
telephone.
When adapters are used, the multiline terminal must be installed on the wall using the
WM-R Unit.
1.
2.
3.
4.
10 - 28
M M
OUNTING A ULTILINE
)
NIT
Plug line cord in the wall receptacle. Leave about eight inches of cord and
bundle the rest.
Feed the line cord through the opening in the wall mount unit as illustrated in
Figure 10-39 Attaching the Wall Mount Unit to the
Attach the WM-R Unit using six screws.

Figure 10-39 Attaching the Wall Mount Unit to the Wall

Install the multiline terminal over the four tabs on the base cover, and push
down until it clicks in place as illustrated in
Terminal to the Wall Mount
T
ERMINAL USING THE
Figure 10-40 Attaching the Multiline
Unit.
Installing D
UNIVERGE SV8100
W M U
ALL OUNT
Wall.
term
Series i Telephones
NIT