Figure 6-89 Connecting The Paired Device; Figure 6-90 Unpairing A Device; Figure 6-91 Setting Visibility Option - NEC Univerge SV8100 System Hardware Manual

Issue 2.0
6 - 70
9.1.2.4 Connecting the Paired Device
Enable the Bluetooth device. Select [2 Enable] in the
Connect screen.

Figure 6-89 Connecting the Paired Device

9.1.2.5 Unpairing
To unpair a paired the Bluetooth device, select the device
in the [Delete] screen.

Figure 6-90 Unpairing a Device

9.1.2.6 Visibility Setting
Set to Disable (default: [1. Disable]).

Figure 6-91 Setting Visibility Option

After pairing a Bluetooth device, be sure to
configure its connection to enable it. If
settings are not completed, the Bluetooth
device that does the pairing cannot be used.
Installing SV8100 Cordless Telephones
UNIVERGE SV8100