Figure 4-20 Pz-8Dlcb Blade - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
4.2
System Hardware Manual
PZ-8DLCB (Digital Station Daughter Board)
4.2.1 Description
The PZ-8DLCB daughter board provides eight digital extensions.
This daughter board is installed on the CD-8DLCA and expands the
port capacity for the combined blades to 16.
Refer to the following tables for maximum upgrade capacities of the
PZ-8DLCB daughter board:
Table 2-6 SV8100 Maximum 9.5" Gateway and 19" System Capacities

– Blades on page 2-13
Table 2-7 SV8100 Maximum 9.5" Base and Expansion System

Capacities – Blades on page 2-15
4.2.2 Installation
The PZ-8DLCB is installed on the CD-8DLCA. To install:
1. Connect the PZ-8DLCB to the CN2 connector on the
CD-8DLCA blade. Refer to
page 4-46
2. Install the CD-8DLCA into a slot.
3. Each CNx01 connector (CN101, CN201, CN301, CN401) is
used to connect up to four digital extensions.

Figure 4-20 PZ-8DLCB Blade

Figure 4-18 CD-8DLCA Blade on
for the location of the connectors on the blade.
Issue 2.0
4 - 51