Table 4-13 Ipla Daughter Board Led Indications; Table 4-14 Ipla Daughter Board Led Cn1 Transmit/Receive Data Indications - NEC Univerge SV8100 System Hardware Manual

Issue 2.0
Link 10/100
(LED 1)
LINK 1000
(LED2)
DUPLEX
(LED3)
ACT
(LED4)

Table 4-14 IPLA Daughter Board LED CN1 Transmit/Receive Data Indications

LED
1000
Mbps
ACT (LED4)
DUPLEX (LED3)
LINK1000 (LED2)
LINK10_100
(LED1)
4 - 34
3.4.4 LED Indications
LED indications for the PZ-32IPLA, PZ-64IPLA and PZ-128IPLA
Daughter Boards are indicated in
LED Indications. Each LED is listed with its associated function and
LED and Operational status. Refer to
Blade with Daughter Boards Installed on page 4-17
the LEDs on the blades.

Table 4-13 IPLA Daughter Board LED Indications

LED
10 Base-T/100 Base-TX link
speed indicator
1000 Base-T link speed
indicator
Duplex Status
Link activity or data
transmission and reception
The following table shows the LED indication when transmitting or
receiving data on CN1.
Auto Negotiation Mode
100Mbps
Half Full
ON ON ON
ON OFF ON
ON OFF OFF
OFF ON ON
Function
Link Up
10Mbps
1000
Mbps
Half Full
ON ON ON
OFF ON ON
OFF OFF ON
OFF OFF OFF
UNIVERGE SV8100
Table 4-13 IPLA Daughter Board
Figure 4-7 CD-CP00-US
for the location of
LED Status Operation Status
On Red 100 Base-TX link up
On Red 1000 Base-T link up
On Yellow Full duplex operation
On Green Link up completed
Force Mode
100Mbps
Half Full
ON ON
OFF ON
OFF OFF
ON ON
Installing the SV8100 Blades
10Mbps
Half Full
ON ON
OFF ON
OFF OFF
ON ON