Figure 9-34 Voice Security Recorder Connection; Operation Note - NEC Univerge SV8100 System Hardware Manual

Issue 2.0
11.4
9 - 44
Password

Locks access to these settings and those at the user level.
 When changes are made, the application must be closed and started
again to become effective.

Figure 9-34 Voice Security Recorder Connection

Operation Note

Use the Options and File Management tabs in the D
Recorder application to adjust the program settings as required (directory for
storing messages, message deletion, file format, etc.).
It is recommended, after the initial installation of the D
Recorder application, that the audio balance of the remote side be changed to
approximately 100%.
term
1. Open the D Voice Security Recorder application.
2. Click the Options tab.
3. Using the up arrow button, change the Remote Boost (%) setting to
100%.

Excessive boost can distort audio.
UNIVERGE SV8100
term ®
Voice Security
term
Voice Security
Installing SV8100 Optional Equipment