UNIVERGE SV8100
System Hardware Manual
6.
Secure the chassis to the CHS BASE UNIT using eight screws
supplied with the CHS2U JOINT BRACKET KIT.
Figure 3-80 Install CHS2U JOINT BRACKET KIT
7.
Connect the ground wire to all chassis. Refer to
Grounding on 19" Chassis on page 3-18
on grounding the system.
8.
Refer to
3.3.5 Install AC Power Cords on 19" Chassis on page
3-20
to continue installation of the chassis or, Chapter 6
paragraph
2.1 Installation and Safety Precautions on page 4-4
for installation of blades.
Issue 2.0
3.3.3 Install
for complete details
3 - 69